Waste Management

A budget price solution for your workplace recycling needs, made from hardwearing polypropylene, with a lift lid design and snap-lock top for easy bag replacement. Available in four colours.

Weight: 1.70kg
Capacity: 50L
Size: 40x40x50cm

A budget price solution for your workplace recycling needs, made from hardwearing polypropylene, with a lift lid design and snap-lock top for easy bag replacement. Available in four colours.

Weight: 1.70kg
Capacity: 50L
Size: 40x40x50cm

A budget price solution for your workplace recycling needs, made from hardwearing polypropylene, with a lift lid design and snap-lock top for easy bag replacement. Available in four colours.

Weight: 1.70kg
Capacity: 50L
Size: 40x40x50cm

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

Manufactured in 1.6mm cold reduced mild steel, bekryzinc primed and polyester powder coated, oven cured for a lasting robust gloss finish.

Bright zinc plated clamp bands to ensure plastic liner will stay in place ready to be emptied and replaced when required.

Available in Red or Green, also available in a 40lt variant.

Manufactured in 1.6mm cold reduced mild steel, bekryzinc primed and polyester powder coated, oven cured for a lasting robust gloss finish.

Bright zinc plated clamp bands to ensure plastic liner will stay in place ready to be emptied and replaced when required.

Available in Red or Green, also available in a 40lt variant.

Compostable liners are the preferred and recommended choice for the capture and containment of food waste. As household food waste collections become mandatory, compostable liners present the ideal solution to line food caddies and collect this waste. 

We recognise the need to provide councils and waste management companies with an effective method of capturing food waste, increasing participation rate and minimising contamination.

Manufactured from Ecopond® biodegradable plastic, using starch and lactide-based derivatives of plant sources, these products are fully compliant with the European composting standard, which requires more than 90% of the plastic mass to convert into biomass, CO2 and water, with no harmful residue.

These compostable sacks and liners fully decompose within the normal 6-10 week composting cycle in industrial composting facilities and are accredited to meet the stringent composting standard EN13432.

40L / 7.46kg   170x675x690mm   500pcs/carton (20 rolls x 25pcs)

This 80 litre Galvanised steel liner is suitable for the Herald Slim line collection of litter bins.

Manufactured in 0.7mm Galvanised mild steel for a balanced weight to strength combination. Pre-galavanised mild steel for better resiliance in the outdoor environment.

80lt Herald Steel Litter Bin Slim Line - Flat Lid

Manufactured in 2mm cold reduced mild steel, treated with a rust resistant bekryzinc primer prior to polyester powder coating for a lasting robust finish.

We then add a heavy duty slam lock to prevent any unwanted access. Herald bins come with litter guides and drainage holes as standard.

The 80 litre galvanised steel liner ensures the unit can be serviced through the front door with ease. Manufactured in 0.7mm galvanised steel to withstand the rigours of a busy street life. The liner has a perfect strength to weight balance and the resilience to survive in the busiest of areas. 

Designed to be bolted to the ground.

Available in standard gloss colours, Black, Blue and Green with Gold banding and graphics.

Manufactured to order.

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions:

The Fyrex range of sackholders are manufactured form 0.9mm cold reduced mild steel for the body and 1.6mm for the frame and lid. They are design to help prevent the risk of small bin fires spreading.
With an all steel construction, iron phosphate primer and a glossy polyester powder coated finish these bins should provide a long lasting solution for your waste segregation and protect against any unwanted attention from small rodents or pests.

Dimensions: