2x5lt TASKI Jontec ESD F2k Static Dissipative Emulsion Polish

Benefits
Protects your floor investment against traffic abuses and eases cleaning.
Eliminates risk of electric shocks and therefore of damages of equipments.
Fulfills basic requirements of IEC 61340-5-1
Guarantees safety for your employees, patients and customers.

Use instructions
1. Treat only stripped and thoroughly rinsed and completely dry floors. Sparingly pour the product onto the floor and evenly spread it while still wet with a polish applicator in overlapping lanes of 1 - 1.5 m.
2. Always apply 3 coats on the floor and always allow a 60 minutes minimum drying time in between two coats. After the last coat, allow minimum 60 minutes before traffic.
3. To keep static dissipative capability and high gloss, recoat in medium to high traffic areas every 3 months and in low traffic areas every 6 months.

Maintenance:
Always allow a new treatment to cure for 48 hours before doing any type of wet maintenance. 
Remove loose dirt with a dry mop on a daily base.
To ensure static dissipative capability, maintain with TASKI Jontec Destat.
Apply TASKI Jontec Destat 3 times a week for moderate to heavy traffic areas.
Apply once a week or as needed on light traffic areas. Do not rinse the floor after application.
In dry environments, apply 3 times a week to keep static dissipative readings low.

Dosage*
Ready to use, no dilution required.
*This dosage is according to optimal conditions, recommendations may vary, please consult with your Diversey representative for directions.